SCI-Expanded

Thermodynamics, environmental damage cost, exergoeconomic, life cycle, and exergoenvironmental analyses of a JP-8 fueled turbodiesel aviation engine at take-off phase

HakemliÖzgün MakaleQ1 quartileSCI-ExpandedUluslararası
P Korba, O Balli, H Caliskan, S Al-Rabeei, U Kale
Case Studies in Thermal Engineering, Volume 43, March 2023, 102806.
Yayın yılı: 2023

Thermodynamic analysis of cumene production plant for identification of energy recovery potentials

HakemliÖzgün MakaleQ1 quartileSCI-ExpandedUluslararası
Abdul Samad, Husnain Saghir, Iftikhar Ahmad, Farooq Ahmad, Hakan Caliskan
Energy Volume 270, 1 May 2023, 126840.
Yayın yılı: 2023

Production and Assessment of New Biofuels from Waste Cooking Oils as Sustainable Bioenergy Sources

HakemliÖzgün MakaleQ1 quartileSCI-ExpandedUluslararası
Hakan Caliskan, Ibrahim Yildiz, Kazutoshi Mori
Energies, 2023, 16(1), 463.
Yayın yılı: 2023

Manuscript title: Novel investigation on atomization, performance, and emission characteristics of preheated jatropha oil methyl ester and ethyl ester

HakemliÖzgün MakaleQ1 quartileSCI-ExpandedUluslararası
PS Yadav, Z Said, R Gautam, R Raman, H Caliskan
Energy, 13 February 2023, 126870.
Yayın yılı: 2023

Environmental and thermoecological comparative assessment of improved humid air waste heat recovery configurations

HakemliÖzgün MakaleQ1 quartileSCI-ExpandedUluslararası
R Tariq, H Caliskan, NA Sheikh
Journal of Cleaner Production Available online 10 April 2023, 137148.
Yayın yılı: 2023

Energy, exergy, thermoecologic, environmental, enviroeconomic and sustainability analyses and assessments of the aircraft engine fueled with biofuel and jet fuel

HakemliÖzgün MakaleQ1 quartileSCI-ExpandedUluslararası
HY Akdeniz, O Balli, H Caliskan
Journal of Thermal Analysis and Calorimetry (2023).
Yayın yılı: 2023

Energy, exergy, economic, environmental, and sustainability assessments of the CFM56-3 series turbofan engine used in the aviation sector

HakemliÖzgün MakaleQ1 quartileSCI-ExpandedUluslararası
P Korba, O Balli, H Caliskan, S Al-Rabeei, U Kale
Energy, 2023, 126765.
Yayın yılı: 2023

Aviation, energy, exergy, sustainability, exergoenvironmental and thermoeconomic analyses of a turbojet engine fueled with jet fuel and biofuel used on a pilot trainer aircraft

HakemliÖzgün MakaleQ1 quartileSCI-ExpandedUluslararası
Ozgur Balli, Nesrin Caliskan, Hakan Caliskan
Energy Volume 263, Part D, 15 January 2023, 126022.
Yayın yılı: 2023

Advanced, extended and combined extended-advanced exergy analyses of a novel geothermal powered combined cooling, heating and power (CCHP) system

HakemliÖzgün MakaleQ1 quartileSCI-ExpandedUluslararası
Hakan Caliskan, Emin Açıkkalp, H Rostamnejad Takleh, V Zare
Renewable Energy Volume 206, April 2023, Pages 125-134
Yayın yılı: 2023

Various thermoeconomic assessments of a heat and power system with a micro gas turbine engine used for industry

HakemliÖzgün MakaleQ1 quartileSCI-ExpandedUluslararası
Ozgur Balli, Hakan Caliskan
Energy Conversion and Management, 252; 114984: 1-10.
Yayın yılı: 2022

Thermodynamic-based environmental and enviroeconomic assessments of a turboprop engine used for freight aircrafts under different flight phases

HakemliÖzgün MakaleQ1 quartileSCI-ExpandedUluslararası
Ali Dinc, Hakan Caliskan, Selcuk Ekici, Yasin Sohret
Journal of Thermal Analysis and Calorimetry (2022), pp. 1-15.
Yayın yılı: 2022

Thermodynamic-based analyses and assessments of a new-generation turbojet engine used for unmanned aerial vehicles (UAVs)

HakemliÖzgün MakaleQ1 quartileSCI-ExpandedUluslararası
Yasin Sohret, Hakan Caliskan
Journal of Thermal Analysis and Calorimetry, 1-16.
Yayın yılı: 2022

Thermal analysis and assessment of phase change material utilization for heating applications in buildings: A modelling

HakemliÖzgün MakaleQ1 quartileSCI-ExpandedUluslararası
Caliskan, H., Gurbuz, H., Sohret, Y., Ates, D.
Journal of Energy Storage, Elsevier, 50 (104593), pp. 1-11.
Yayın yılı: 2022

Sustainability analyses of photovoltaic electrolysis and magnetic heat engine coupled novel system used for hydrogen production and electricity generation

HakemliÖzgün MakaleQ2 quartileSCI-ExpandedUluslararası
Emin Acikkalp, Onder Altuntas, Hakan Caliskan, Giulia Grisolia, Umberto Lucia, David Borge-Diez, Enrique Rosales-Asensio
Sustainable Energy Technologies and Assessments 52(B) (2022) 102094: 1-9.
Yayın yılı: 2022

Prediction of optimum operating conditions of a furnace under uncertainty: An integrated framework of artificial neural network and genetic algorithm

HakemliÖzgün MakaleQ1 quartileSCI-ExpandedUluslararası
Muzammil Khan, Iftikhar Ahmad, Muhammad Ahsan, Manabu Kano, Hakan Caliskan
Fuel, Volume 330, 15 December 2022, 125563, pp. 1-13.
Yayın yılı: 2022

Performance analysis of PVT systems applicable to apartment housing structures: Experiment and simulation

HakemliÖzgün MakaleQ3 quartileSCI-ExpandedUluslararası
Hongjie Piao, Hakan Caliskan, Jae Dong Chung, Jong Hyun Kim, Hiki Hong
Journal of Mechanical Science and Technology 36, 5299–5307 (2022).
Yayın yılı: 2022

Life cycle assessment based exergoenvironmental analysis of a cogeneration system used for ceramic factories

HakemliÖzgün MakaleQ2 quartileSCI-ExpandedUluslararası
Hasan Caglayan, Hakan Caliskan
Sustainable Energy Technologies and Assessments 52 (2022) 102078: 1-16.
Yayın yılı: 2022

Extended exergy analysis of a photovoltaic-thermal (PVT) module based desiccant air cooling system for buildings

HakemliÖzgün MakaleQ1 quartileSCI-ExpandedUluslararası
Emin Acikkalp, Hakan Caliskan, Hiki Hong, Hongjie Piao, Dohyun Seung
Applied Energy, Volume 323, 1 October 2022, 119581, pp. 1-8.
Yayın yılı: 2022

Evaluating and modelling of thermodynamic and environmental parameters of a gas turbine engine and its components

HakemliÖzgün MakaleQ1 quartileSCI-ExpandedUluslararası
Hakan Aygun, Hakan Caliskan
Journal of Cleaner Production, Volume 365, 10 September 2022, 132762, pp. 1-13.
Yayın yılı: 2022

Environmental impact assessments of different auxiliary power units used for commercial aircraft by using global warming potential approach

HakemliÖzgün MakaleQ2 quartileSCI-ExpandedUluslararası
O Balli, H Caliskan
Environmental Science and Pollution Research, 2022, pp. 1-13.
Yayın yılı: 2022

Energy, exergy, environmental and sustainability assessments of jet and hydrogen fueled military turbojet engine

HakemliÖzgün MakaleQ2 quartileSCI-ExpandedUluslararası
Ozgur Balli, Hakan Caliskan
International Journal of Hydrogen Energy, Volume 47, Issue 62, 22 July 2022, Pages 26728-26745.
Yayın yılı: 2022

Energy, exergy, economic, environmental, energy based economic, exergoeconomic and enviroeconomic (7E) analyses of a jet fueled turbofan type of aircraft engine

HakemliÖzgün MakaleQ1 quartileSCI-ExpandedUluslararası
Akdeniz, HY., Balli, O., Caliskan, H.
Fuel, 322 (124165), pp. 1-22.
Yayın yılı: 2022

Assessment of biofuels from waste cooking oils for diesel engines in terms of waste-to-energy perspectives

HakemliÖzgün MakaleQ2 quartileSCI-ExpandedUluslararası
Ibrahim Yildiz, Hakan Caliskan, Kazutoshi Mori
Sustainable Energy Technologies and Assessments, Volume 50, March 2022, 101839.
Yayın yılı: 2022

Assessment of a cogeneration system for ceramic industry by using various exergy based economic approaches

HakemliÖzgün MakaleQ1 quartileSCI-ExpandedUluslararası
Hasan Caglayan, Hakan Caliskan
Renewable and Sustainable Energy Reviews, 167 (2022) 112728, pp. 1-16.
Yayın yılı: 2022

Analysis of vapor compression refrigeration cycle using advanced exergetic approach with Taguchi and ANOVA optimization and refrigerant selection with enviroeconomic concerns by TOPSIS analysis

HakemliÖzgün MakaleQ2 quartileSCI-ExpandedUluslararası
Ustaoglu A., Kursuncu B., Kaya A.M., Caliskan H.
Sustainable Energy Technologies and Assessments 52 (B) 102182: 1-15.
Yayın yılı: 2022

An intelligent sensing system for estimation of efficiency of carbon-capturing unit in a cement plant

HakemliÖzgün MakaleQ1 quartileSCI-ExpandedUluslararası
Usman Khan Jadoon, Iftikhar Ahmad, Tayyaba Noor, Manabu Kano, Hakan Caliskan, Muhammad Ahsan
Journal of Cleaner Production, Volume 377, 1 December 2022, 134359.
Yayın yılı: 2022

An integrated approach of artificial neural networks and polynomial chaos expansion for prediction and analysis of yield and environmental impact of oil shale retorting process under uncertainty

HakemliÖzgün MakaleQ1 quartileSCI-ExpandedUluslararası
Hasan Qayyum Chohan, Iftikhar Ahmad, Nisar Mohammad, Davide Manca, Hakan Caliskan
Fuel, 329 (125351), 1-12. Elsevier.
Yayın yılı: 2022

Advanced exergy analysis of the turbojet engine main components considering mexogenous, endogenous, exegenous, avoidable and unavoidable exergy destructions

HakemliÖzgün MakaleQ1 quartileSCI-ExpandedUluslararası
Hakan Caliskan, Selcuk Ekici, Yasin Sohret
Propulsion and Power Research Volume 11, Issue 3, September 2022, Pages 391-400
Yayın yılı: 2022

Advanced exergy analysis of a turbojet engine main components considering mexogenous, endogenous, exegenous, avoidable and unavoidable exergy destructions

HakemliÖzgün MakaleQ1 quartileSCI-ExpandedUluslararası
H. Caliskan, S. Ekici, Y. Sohret
Propulsion and Power Research, 2022.
Yayın yılı: 2022

Turbofan engine performances from aviation, thermodynamic and environmental perspectives

HakemliÖzgün MakaleQ1 quartileSCI-ExpandedUluslararası
Ozgur Balli, Hakan Caliskan
Energy, Volume 232 (2021) 121031, pp. 1-14, June 2021.
Yayın yılı: 2021

On-design and off-design operation performance assessmentsof an aero turboprop engine used on unmanned aerial vehicles (UAVs) in terms of aviation, thermodynamic, environmental and sustainability perspectives

HakemliÖzgün MakaleQ1 quartileSCI-ExpandedUluslararası
Ozgur Balli, Hakan Caliskan
Energy Conversion and Management, 243 (2021)114403, pp. 1-13. June 2021.
Yayın yılı: 2021

Novel combined extended-advanced exergy analysis methodology as a new tool to assess thermodynamic systems

HakemliÖzgün MakaleQ1 quartileSCI-ExpandedUluslararası
Emin Açıkkalp, Hakan Caliskan, Onder Altuntas, Arif Hepbasli
Energy Conversion and Management, Volume 236, pp. 1-10, May 2021, 114019.
Yayın yılı: 2021

Environmental and enviroeconomic analyses of two different turbofan engine families considering landing and take-off (LTO) cycle and global warming potential (GWP) approach

HakemliÖzgün MakaleQ1 quartileSCI-ExpandedUluslararası
Aygun, H., Caliskan, H.
Energy Conversion and Management 248 (114797), 1-12.
Yayın yılı: 2021

Enhanced life cycle modelling of a micro gas turbine fuelled with various fuels for sustainable electricity production

HakemliÖzgün MakaleQ1 quartileSCI-ExpandedUluslararası
S.Kagan Ayaz, Onder Altuntas, Hakan Caliskan
Renewable and Sustainable Energy Reviews, Volume 149, pp. 1-24, October 2021, 111323.
Yayın yılı: 2021

Energy, exergy and environmental assessments of biodiesel and diesel fuels for an internal combustion engine using silicon carbide particulate filter

HakemliÖzgün MakaleQ1 quartileSCI-ExpandedUluslararası
Ibrahim Yildiz, Hakan Caliskan, Kazutoshi Mori
Journal of Thermal Analysis and Calorimetry, 145(3), 739-750
Yayın yılı: 2021

Abstract

In this study, an internal combustion engine is experimentally analyzed under 100 Nm engine load using biodiesel and diesel fuels. The analyses of energy, exergy and environment are also applied to the internal combustion engine without after treatment system (Engine-Out) and with silicon carbide-based diesel particle filter (SiC-DPF) after treatment system. The impact of the utilization of SiC-DPF on the exhaust emissions and energy, exergy, environmental analyses results are examined. It is determined that (1) the work rate of diesel-fueled engine is higher than the biodiesel-fueled engine. (2) When energy and exergy losses are taken into consideration, the use of SiC-DPF has a positive effect on the emissions of the biodiesel-fueled engine, but it does not have the same effect for the diesel-fueled engine. (3) The biodiesel-fueled engine has higher energy and exergy efficiencies than diesel-fueled engine with and without after treatment systems. (4) In terms of exergy destruction, the results of the diesel-fueled engine have the maximum value with the use of SiC-DPF after treatment system, while the results of the biodiesel-fueled engine have the minimum value with the use of SiC-DPF. This reveals the effectiveness of the use of SiC-DPF after treatment system. (5) The emission rate of CO2 is obtained as maximum for the biodiesel-fueled engine. Also, the minimum CO2 emission rate is determined for the diesel-fueled engine without after treatment system. The use of SiC-DPF contributes to a reduction in CO2 emission for the biodiesel fuel, while it causes an increase for the diesel fuel. (6) The entropy generation rate of the biodiesel-fueled engine is lower than the diesel-fueled engine with and without after treatment options. This study could help future studies on the choice of fuels and utilization of after treatment systems in the internal combustion engines in terms of better environment.

Energy, environment and enviroeconomic analyses and assessments of the turbofan engine used in aviation industry

HakemliÖzgün MakaleQ3 quartileSCI-ExpandedUluslararası
Halil Tuzcu, Yasin Sohret, Hakan Caliskan
Environmental Progress & Sustainable Energy, 2021;40:e13547; pp.1-8.
Yayın yılı: 2021

Abstract

In this study, energy, environment and enviroeconomic analyses are applied to the turbofan engine used in aviation industry. The CO2 emissions of the turbofan engine are calculated and cost of the CO2 emissions for a daily period are evaluated. The energy efficiencies of the overall turbofan engine system, high pressure turbine, low pressure turbine and the combustion chamber are found as 19.7%, 26.2%, 29.2% and 90%, respectively. The CO2 emissions releasing in a day are calculated as 358.9 tonCO2/day, while the CO2 emissions price in a day are calculated as 5742.52 US$/day for the turbofan engine. Also, 3.35 kg carbon dioxide is released into the air as a result of 1 kg of kerosene burning. Environmental and the enviroeconomic results of this study can be useful for developing environmentally sustainable turbofan engines as well as for researches and designers in aviation industry.

Keywords
atmospheric emissions; CO2; energy efficiency; enviroeconomic analysis; environmental analysis; gas turbine

Energy and exergy prices of the jet kerosene fuel with carbon emission equivalents for an aircraft used in the air transport sector in Turkey

HakemliÖzgün MakaleQ4 quartileSCI-ExpandedUluslararası
IBRAHIM YILDIZ, HAKAN CALISKAN
Aircraft Engineering and Aerospace Technology, Volume 93 No. 3 (2021), pp. 457–461. June 2021.
Yayın yılı: 2021

Effects of cordierite particulate filters on diesel engine exhaust emissions in terms of pollution prevention approaches for better environmental management

HakemliÖzgün MakaleQ1 quartileSCI-ExpandedUluslararası
Ibrahim Yildiz, Hakan Caliskan, Kazutoshi Mori
Journal of Environmental Management, Volume 293, 1 September 2021, 112873.
Yayın yılı: 2021

Advanced exergy analyses and optimization of a cogeneration system for ceramic industry by considering endogenous, exogenous, avoidable and unavoidable exergies under different environmental conditions

HakemliÖzgün MakaleQ1 quartileSCI-ExpandedUluslararası
Hasan Caglayan, Hakan Caliskan
Renewable and Sustainable Energy Reviews, Volume 140, pp. 1-23, April 2021, 110730.
Yayın yılı: 2021

Abstract

In this study, the conventional and advanced exergy analyses are performed to the cogeneration system (COGEN) that consists of gas turbine unit and spray dryers in ceramic factory under five different environment conditions for the optimization. According to exergy analysis, the maximum exergy efficiency of the COGEN is found as 29.850% at 30 °C environment temperature, while the maximum exergy destruction rate is calculated as 17810.61 kW at 30 °C environment temperature. According to advanced exergy analysis, combustion chamber (CC) may not be the only component to be focused on for exergy destruction. Because, the exergy destruction rate can be caused by its own internal reasons (endogenous) as well as other components (exogenous). In other words, the relationship between components can be revealed. Chemical reactions occurring in CC, wall tile dryer (WD) and ground tile dryer (GD) cause an increase in endogenous exergy destruction rate of the COGEN system. Due to the improvement potential increase in components, the exergy efficiency of the whole system (COGEN) increases to between 45% and 47% with an increase of approximately between 15% and 17% for five different dead temperatures. Also, the unavoidable exergy destruction rates of the CC and air compressor (AC) are much higher than their avoidable exergy destruction rates. In particular, the avoidable exergy destruction of the WD and GD has been shown to have a significant effect on other components.

VSI: Environment & Energy

HakemliÖzgün MakaleQ1 quartileSCI-ExpandedUluslararası
Hakan Caliskan, Janardhan Reddy Koduru, Emin Acikkalp, Onder Altuntas
Journal of Environmental Management, vol. 270, pp. 1-3, 20 June 2020, 110668.
Yayın yılı: 2020

Thermo-ecologic assessment and life cycle based environmental pollution cost analysis of a micro gas turbine

HakemliÖzgün MakaleQ3 quartileSCI-ExpandedUluslararası
SÜLEYMAN KAĞAN AYAZ,ÖNDER ALTUNTAŞ,HAKAN ÇALIŞKAN
JOURNAL OF ENVIRONMENTAL ENGINEERING, vol. 146 (1), pp. 1-8, Jan. 2020.
Yayın yılı: 2020

Abstract

Increasing global warming concerns are compelling humanity to find alternative fuels to fossil fuels. Ammonia, with its carbon-free structure, can be combusted to produce only water and nitrogen. This study includes exergy analysis–based thermoecologic analysis and life cycle assessment–based environmental pollution cost analysis of a Turbec T100 microturbine. A Turbec T100 microturbine is normally operated with natural gas combustion and is modeled using commercially available software for (1) natural gas; (2) 10% ammonia and 90% natural gas; and (3) 20% ammonia and 80% natural gas mass fractions. The ecologic objective function and ecological coefficient of performance parameters for natural gas combustion are −174.441 and 0.37336, respectively. The 20% ammonia combustion has the best ecologic objective function and ecological coefficient of performance results, which are −156.818 and 0.3986, respectively. The 20% ammonia combustion also decreases the environmental and life cycle–based environmental payback period. However, 20% ammonia combustion slightly increases the payback period of the system. The 20% ammonia has the lowest CO2-equivalent emission rate due to producing the lowest CO2-equivalent emissions during combustion. Finally, 20% ammonia combustion decreases total and specific environmental pollution costs.

Environment-Energy Nexus: Industrial Ecology’s Perspective

HakemliÖzgün MakaleQ3 quartileSCI-ExpandedUluslararası
HAKAN CALISKAN
Journal of Environmental Engineering, 2020, vol. 146(6): 02020001, pp. 1-2, Mar. 2020.
Yayın yılı: 2020

Assessments of High-Efficient Regenerative Evaporative Cooler Effects on Desiccant Air Cooling Systems

HakemliÖzgün MakaleQ3 quartileSCI-ExpandedUluslararası
Hakan Caliskan , Dae-Young Lee , Hiki Hong
Journal of Energy Resources Technology, vol. 142(7): 072104, pp. 1-6, Jul 2020.
Yayın yılı: 2020

Abstract

In this paper, the effects of regenerative evaporative coolers on the dry desiccant air cooling system are assessed. Thermodynamic analysis is performed point by point on the unmodified (ɛ = 0.67) and modified (ɛ = 1) regenerative evaporative cooler supported systems. It is found that the effectiveness and efficiency of the system were significantly increased by modification. Effectiveness of the system increases from 0.95 to 2.16 for the wet bulb and from 0.63 to 1.43 for dew point effectivenesses, while the exergy efficiency increases from 18.40% to 41.93%. Exergy and energy performances of the system increase 1.28 times and 0.61 times, respectively. Finally, sustainability is increased by 40% with the modification of the regenerative evaporative cooler. Also, changing the regenerative evaporative cooler of the solid desiccant wheel with the effective one can increase the overall system efficiency and performance without changing the sensible heat and desiccant wheels.
Issue Section:

Energy Systems Analysis

Keywords:

desiccant air cooling, effectiveness, heat transfer, performance, regenerative evaporative cooler, energy conversion/systems, energy systems analysis, heat energy generation/storage/transfer

Thermodynamic based economic and environmental analyses of an industrial cogeneration system

HakemliÖzgün MakaleQ1 quartileSCI-ExpandedUluslararası
Hasan Çağlayan,HAKAN ÇALIŞKAN
Applied Thermal Engineering, vol. 158, pp. 113792–0, Jul. 2019.
Yayın yılı: 2019

Thermodynamic assessments of the novel cascade air cooling system including solar heating and desiccant cooling units

HakemliÖzgün MakaleQ1 quartileSCI-ExpandedUluslararası
ÇALIŞKAN HAKAN, Hong Hiki, Jang Jin Kyung
Energy Conversion and Management, 199, Article 112013
Yayın yılı: 2019

Life Cycle Cost, Cooling Degree Day and Carbon Dioxide Emission Assessments of the Insulation of Refrigerated Warehouses Industry in Turkey

HakemliÖzgün MakaleQ3 quartileSCI-ExpandedUluslararası
HANDE MUTLU OZTURK,ÖMER ALTAN DOMBAYCI,HAKAN ÇALIŞKAN
JOURNAL OF ENVIRONMENTAL ENGINEERING, pp. 0–0, Sep. 2019.
Yayın yılı: 2019

Enhanced thermodynamic assessments of the novel desiccant air cooling system for sustainable energy future

HakemliÖzgün MakaleQ1 quartileSCI-ExpandedUluslararası
HAKAN ÇALIŞKAN,Dae-Young Lee,Hiki Hong
Journal of Cleaner Production, vol. 211, pp. 213–221, Feb. 2019.
Yayın yılı: 2019

Thermodynamic, environmental and economic effects of diesel and biodiesel fuels on exhaust emissions and nano-particles of a diesel engine

HakemliÖzgün MakaleQ1 quartileSCI-ExpandedUluslararası
HAKAN ÇALIŞKAN,Kazutoshi Mori
Transportation Research Part D: Transport and Environment, vol. 56, pp. 203–221, Oct. 2017.
Yayın yılı: 2018

Environmental and enviroeconomic researches on diesel engines with diesel and biodiesel fuels

HakemliÖzgün MakaleQ1 quartileSCI-ExpandedUluslararası
HAKAN ÇALIŞKAN
Journal of Cleaner Production, vol. 154, pp. 125–129, Jun. 2017.
Yayın yılı: 2018

Energy, exergy and sustainability assessments of a cogeneration system for ceramic industry

HakemliÖzgün MakaleQ1 quartileSCI-ExpandedUluslararası
Hasan Çağlayan,HAKAN ÇALIŞKAN
Applied Thermal Engineering, vol. 136, pp. 504–515, May 2018.
Yayın yılı: 2018

Thermodynamic and environmental analyses of biomass solar and electrical energy options based building heating applications

HakemliÖzgün MakaleQ1 quartileSCI-ExpandedUluslararası
HAKAN ÇALIŞKAN
Renewable and Sustainable Energy Reviews, vol. 43, pp. 1016–1034, Mar. 2015.
Yayın yılı: 2015

Novel approaches to exergy and economy based enhanced environmental analyses for energy systems

HakemliÖzgün MakaleQ1 quartileSCI-ExpandedUluslararası
HAKAN ÇALIŞKAN
ENERGY CONVERSION AND MANAGEMENT, vol. 89, pp. 156–161, Jan. 2015.
Yayın yılı: 2015

Energy exergy thermoeconomic and sustainability analyses of a building heating system with a combi boiler

HakemliÖzgün MakaleQ4 quartileSCI-ExpandedUluslararası
HAKAN ÇALIŞKAN
International Journal of Exergy, vol. 14, no. 2, pp. 244–0, Jan. 2014.
Yayın yılı: 2014

Thermoeconomic analysis of a building energy system integrated with energy storage options

HakemliÖzgün MakaleQ1 quartileSCI-ExpandedUluslararası
HAKAN ÇALIŞKAN,DİNÇER İBRAHİM,ARİF HEPBAŞLI
Energy Conversion and Management, vol. 76, pp. 274–281, Dec. 2013.
Yayın yılı: 2013

Letter to Editor: Rebuttal to “Some comments to the paper “Energy, exergy and sustainability analyses of hybrid renewable energy based hydrogen and electricity production and storage systems: Modeling and case study””

HakemliÖzgün MakaleQ1 quartileSCI-ExpandedUluslararası
HAKAN ÇALIŞKAN,DİNÇER İBRAHİM,ARİF HEPBAŞLI
Applied Thermal Engineering, vol. 59, no. 1–2, pp. 480–489, Sep. 2013.
Yayın yılı: 2013

Exergoeconomic and environmental impact analyses of a renewable energy based hydrogen production system

HakemliÖzgün MakaleQ2 quartileSCI-ExpandedUluslararası
HAKAN ÇALIŞKAN,DİNÇER İBRAHİM,ARİF HEPBAŞLI
International Journal of Hydrogen Energy, vol. 38, no. 14, pp. 6104–6111, May 2013.
Yayın yılı: 2013

Energetic and exergetic comparison of the human body for the summer season

HakemliÖzgün MakaleQ1 quartileSCI-ExpandedUluslararası
HAKAN ÇALIŞKAN
Energy Conversion and Management, vol. 76, pp. 169–176, Dec. 2013.
Yayın yılı: 2013

Thermodynamic analyses and assessments of various thermal energy storage systems for buildings

HakemliÖzgün MakaleQ1 quartileSCI-ExpandedUluslararası
HAKAN ÇALIŞKAN,DİNÇER İBRAHİM,ARİF HEPBAŞLI
Energy Conversion and Management, vol. 62, pp. 109–122, Oct. 2012.
Yayın yılı: 2012

Exergoeconomic enviroeconomic and sustainability analyses of a novel air cooler

HakemliÖzgün MakaleQ1 quartileSCI-ExpandedUluslararası
HAKAN ÇALIŞKAN,İBRAHİM DİNÇER,ARİF HEPBAŞLI
Energy and Buildings, vol. 55, pp. 747–756, Dec. 2012.
Yayın yılı: 2012

Energy and exergy analyses of combined thermochemical and sensible thermal energy storage systems for building heating applications

HakemliÖzgün MakaleQ1 quartileSCI-ExpandedUluslararası
HAKAN ÇALIŞKAN,DİNÇER İBRAHİM,ARİF HEPBAŞLI
10.1016/j.enbuild.2012.01.017
Yayın yılı: 2012

A comparative study on energetic, exergetic and environmental performance assessments of novel M-Cycle based air coolers for buildings

HakemliÖzgün MakaleQ1 quartileSCI-ExpandedUluslararası
Caliskan, H., Dincer, I., Hepbasli, A.
Energy Conversion and Management, Vol:56, pp. 69-79.
Yayın yılı: 2012

Thermodynamic performance assessment of a novel air cooling cycle Maisotsenko cycle

HakemliÖzgün MakaleQ1 quartileSCI-ExpandedUluslararası
HAKAN ÇALIŞKAN,ARİF HEPBAŞLI,İBRAHİM DİNÇER,VALERIJ MAISOTSENKO
International Journal of Refrigeration, vol. 34, no. 4, pp. 980–990, Jun. 2011.
Yayın yılı: 2011

Exergy Analysis and Sustainability Assessment of a Solar Ground Based Heat Pump With Thermal Energy Storage

HakemliÖzgün MakaleQ3 quartileSCI-ExpandedUluslararası
HAKAN ÇALIŞKAN,ARİF HEPBAŞLI,İBRAHİM DİNÇER
Journal of Solar Energy Engineering, vol. 133, no. 1, pp. 11005–0, Jan. 2011.
Yayın yılı: 2011

Exergetic cost analysis and sustainability assessment of an Internal Combustion Engine

HakemliÖzgün MakaleQ4 quartileSCI-ExpandedUluslararası
HAKAN ÇALIŞKAN,ARİF HEPBAŞLI
International Journal of Exergy, vol. 8, no. 3, pp. 310–0, Jan. 2011.
Yayın yılı: 2011

Exergetic and sustainability performance comparison of novel and conventional air cooling systems for building applications

HakemliÖzgün MakaleQ1 quartileSCI-ExpandedUluslararası
HAKAN ÇALIŞKAN,İBRAHİM DİNÇER,ARİF HEPBAŞLI
ENERGY AND BUILDINGS, vol. 43, no. 6, pp. 1461–1472, Jun. 2011.
Yayın yılı: 2011

Exergy analysis of engines fuelled with biodiesel from high oleic soybeans based on experimental values

HakemliÖzgün MakaleQ4 quartileSCI-ExpandedUluslararası
HAKAN ÇALIŞKAN,MUSTAFA ERTUNÇ TAT,ARİF HEPBAŞLI,JON H VAN
International Journal of Exergy, vol. 7, no. 1, pp. 20–0, Jan. 2010.
Yayın yılı: 2010

Exergetic Analysis and Assessment of Industrial Furnaces

HakemliÖzgün MakaleQ3 quartileSCI-ExpandedUluslararası
HAKAN ÇALIŞKAN,ARİF HEPBAŞLI
Journal of Energy Resources Technology, vol. 132, no. 1, pp. 12001–0, Jan. 2010.
Yayın yılı: 2010

Energy and exergy analyses of ice rink buildings at varying reference temperatures

HakemliÖzgün MakaleQ1 quartileSCI-ExpandedUluslararası
HAKAN ÇALIŞKAN,ARİF HEPBAŞLI
Energy and Buildings, vol. 42, no. 9, pp. 1418–1425, Sep. 2010.
Yayın yılı: 2010

A review on exergetic analysis and assessment of various types of engines

HakemliÖzgün MakaleQ4 quartileSCI-ExpandedUluslararası
HAKAN ÇALIŞKAN,MUSTAFA ERTUNÇ TAT,ARİF HEPBAŞLI
International Journal of Exergy, vol. 7, no. 3, pp. 287–0, Jan. 2010.
Yayın yılı: 2010

Performance assessment of an internal combustion engine at varying dead reference state temperatures

HakemliÖzgün MakaleQ1 quartileSCI-ExpandedUluslararası
HAKAN ÇALIŞKAN,MUSTAFA ERTUNÇ TAT,ARİF HEPBAŞLI
Applied Thermal Engineering, vol. 29, no. 16, pp. 3431–3436, Nov. 2009.
Yayın yılı: 2009